| Catálogo
/ HVAC
/ Pleated
Filters |
| PLEATED
FILTERS |
| 
|
|
| |
| Product Description:
|
Standard
Capacity Pleats Series 400 |
| The Aerostar Pleated Air Filter
- Series 400 incorporates a 100% synthetic media which
achieves a MERV 8(ASHRAE 52.2). The 1" and 2"
filters handle velocities up to 500 fpm - the 4"
filters up to 625 fpm. |
| |
MERV 8 (per ASHRAE Standard 52.2) |
| |
Moisture resistant, 100% synthetic media
|
| |
Longer service life means lower operating
costs |
| |
A wide range of sizes in 1", 2",
and 4" thicknesses |
| |
Maximum recommended continuous
operating temperature of 150°F |
| Applications: |
| These filters can be used without modification
in side-access filter housings or built-up filter banks.
They offer better efficiency than conventional permanent
or disposable flat filters. The Series 400 filters,
when used as pre-filters, substantially extend the life
of more expensive high-efficiency filters. They are
the perfect filter for residential, commercial and industrial
use. |
|
|
| Product Description:
|
| |
| The Aerostar Pleated Air Filter
- Series 400 high capacity incorporates a 100% synthetic
media which achieves a MERV 8 (ASHRAE 52.2). The 1"
and 2" filters handle velocities up to 500 fpm
- the 4" filters up to 625 fpm. |
| |
MERV 8 (per ASHRAE Standard
52.2) |
| |
Moisture resistant, 100% synthetic media
|
| |
Longer service life means lower operating
costs |
| |
A wide range of sizes in 1", 2",
and 4" thicknesses |
| |
Maximum recommended continuous
operating temperature of 150°F |
| Applications: |
| These filters can be used without modification
in side-access filter housings or built-up filter banks.
They offer better efficiency than conventional permanent
or disposable flat filters. The Series 400 filters,
when used as pre-filters, substantially extend the life
of more expensive high-efficiency filters. They are
the perfect filter for residential, commercial and industrial
use. |
|
|
| Product
Description: |
40%
High Capacity Pleated, Class 1 |
The Aerostar Class I Extended
Surface Pleated filters and elements incorporate an
ultra-fine fiberglass media available in 40% nominal
efficiencies. The media is bonded to a metal grid on
the air leaving side, preventing fluttering and maintaining
uniformity of the pleats. Available in 2" thicknesses.
|
|
|
| Product
Description: |
60%
High Capacity Pleated, Class 1 |
The Aerostar Class I Extended Surface Pleated filters
and elements incorporate an ultra-fine fiberglass media
available in 60% nominal efficiencies. The high capacity
version has 50% more media than the standard capacity
and has a longer service life. Available in 2"
thicknesses.
|
|
|
| Product
Description: |
40%
High Capacity Pleated Element, Class 1 |
The Aerostar Class I Extended
Surface Pleated filters and elements incorporate an
ultra-fine fiberglass media available in 40% nominal
efficiencies. The media is bonded to a metal grid on
the air leaving side, preventing fluttering and maintaining
uniformity of the pleats. Available in 2" thicknesses
|
|
|
| Product
Description: |
60%
High Capacity Pleated Element, Class 1 |
The Aerostar Class I Extended
Surface Pleated filters and elements incorporate an
ultra-fine fiberglass media available in 60% nominal
efficiencies. The high capacity version has 50% more
media than the standard capacity and has a longer service
life. Available in 2" thicknesses.
|
|
| Applications: |
| These filters are used in
commercial and industrial applications where fire codes
require using Class 1 listed products. These filters
can be used without modification in almost any side-access
filter housing or built-up filter bank. Class 1 pleated
filters and elements, when used as pre-filters, will
add substantially to the life of more expensive high-efficiency
filters. |
| |
High capacity pleated design
offers greater dust holding capacity |
| |
Longer service life means lower operating
costs |
| |
Available as complete filter or element
only |
| |
UL900 Class 1 listed |
|
| |
| |
